Samsung Galaxy Xcover 7 Vibrator (Service Pack)
Samsung Galaxy Xcover 7 Vibrator in Service Pack quality, genuine manufacturer part delivered in its professional repair packaging. This component ensures vibrations and haptic alerts identical to the original device, tested before shipment and controlled according to Samsung standards. Ensure maximum reliability with 2 years warranty and complete compatibility with your model.
When to replace the Galaxy Xcover 7 vibrator
The vibrator of the Galaxy Xcover 7 provides haptic feedback and vibration alerts during calls, messages and notifications. You will recognize that it needs to be changed if your device no longer vibrates at all, or if vibrations are weak and intermittent despite restarting the phone. A missing vibration makes silent alerts imperceptible and complicates daily use, particularly in noisy environments where you relied on this tactile feedback to not miss a call.
Since this component is sealed inside the chassis, it cannot be repaired: it must be replaced entirely. Professional intervention takes a few minutes and basic tools. The vibrator disconnects from its ribbon cable and is removed without major difficulty once the case is open.
Original manufacturer part in Service Pack
This vibrator is an original manufacturer part, produced by Samsung's manufacturing lines, delivered in professional repair packaging. Unlike a compatible part made by a third party, it has the same performance and reliability as the factory component. The manufacturer reference GH31-00746A identifies this part with certainty before ordering.
Service Pack packaging ensures direct traceability with Samsung. You receive the vibrator new, with no prior treatment, packaged in the manufacturer's approved distribution conditions. It is this packaging that distinguishes a Service Pack from an ordinary original part: the contents of the box are identical in both versions.
Compatible only with Galaxy Xcover 7
This vibrator is designed for the Samsung Galaxy Xcover 7 only. Connectors and dimensions vary from one model to another, and attempting to install it on another Samsung device would not work, even within the same range. Before ordering, verify that your device is indeed a Galaxy Xcover 7.
Package contents and installation
You receive the vibrator only, ready to be installed. No additional tools are provided: opening the chassis requires a precision screwdriver and a plastic lever to avoid damaging the covers. If you are not equipped, obtain these tools before installation, or entrust the work to a professional repairer. Once the case is open, the vibrator disconnects by gently pulling on the ribbon cable and is removed in a few seconds. Reverse installation follows the same path: connect the ribbon cable and screw the covers back on.
No additional adhesive is necessary: the vibrator is fixed by its internal supports. Before closing the device, test the haptic feedback at maximum volume to verify that vibration is working properly.
Two-year warranty
This vibrator benefits from a two-year warranty from receipt. It covers any malfunction attributable to the part itself: lack of vibration, loss of power, electrical defect. Incorrect installation, a drop of the device or exposure to water after installation are not covered. The shop verifies each part before shipment and you will be able to confirm its proper operation upon receipt.
