Samsung Galaxy S26 Ultra Front Camera Adhesive (Service Pack)
Front Camera Adhesive for Samsung Galaxy S26 Ultra, intended for replacing the original fixation when disassembling the front camera. This is an original manufacturer part, supplied as Service Pack: the exact reference used on Samsung assembly lines, in its official repair packaging. This adhesive ensures reliable retention of the camera module once refitted, without play or premature detachment, a necessary condition for a clean and durable assembly.
The part is covered by a 2-year warranty, a guarantee of reliability for both professional intervention and one-off repair.
Galaxy S26 Ultra Front Camera Adhesive: what is it for?
On the Samsung Galaxy S26 Ultra, the front camera is held and sealed by a dedicated adhesive, stuck between the module and the glass. It provides mechanical retention for the camera and limits the infiltration of dust and moisture around the lens.
This adhesive tears as soon as the device is opened: it cannot be reused after disassembly, a new one must be applied for every intervention involving the front glass or the camera.
When does it need to be replaced?
This replacement becomes necessary as soon as a screen or a front camera has been changed on this device: the old adhesive comes away with the removed part. A worn or poorly repositioned adhesive also leaves the camera slightly mobile in its housing, with a risk of infiltration under the glass.
A genuine Samsung part, in Service Pack
This reference is a genuine manufacturer part, supplied as Service Pack: nothing has been repaired or reconditioned on it, it comes from the same packaging used by Samsung authorized centers for their repairs. The manufacturer reference GH81-28457A allows you to compare it directly with the one indicated on the part to be replaced before ordering.
Compatible with which Galaxy S26 Ultra?
This adhesive is designed for the Samsung Galaxy S26 Ultra. Check your device's model before purchase: an adhesive designed for a different front camera format will not stick properly and will compromise the seal around the module.
What the installation requires
The surface must be perfectly clean before bonding: any trace of residue from the old adhesive or dust reduces adhesion and can leave the camera slightly misaligned once the screen is reassembled.
This operation is generally carried out at the same time as a screen or front camera replacement, since the original adhesive is destroyed as soon as the device is opened.
Warranty
This part is covered by a 2-year warranty.
