The connector no longer charges normally?

A charge that starts then stops, a USB-C cable that must be held in a precise position to work, or a socket that no longer detects the charger: these symptoms generally indicate a worn or damaged charging connector, not the cable or the power adapter. On the Samsung Galaxy S26 Ultra, this small component takes the strain of every plug-in: over the months, the internal contacts wear down and the connection becomes intermittent.

Before ordering, it's worth ruling out other possible causes (faulty cable, clogged port) by testing a second cable or carefully cleaning the port. If the problem persists, replacing the connector remains the most reliable repair.

A Service Pack part, not a refurbished one

This connector is an original manufacturer part, supplied as Service Pack: nothing has been repaired or re-glued on it, it comes off the same manufacturing line as the components fitted in the factory, simply packaged for after-sales repair rather than for the assembly line. It thus differs from compatible parts made by a third party, which reproduce the function without coming from Samsung's lines.

The manufacturer reference GH96-20819A appears on the component: it allows direct comparison with the one printed on the part to be replaced before confirming the order, avoiding any model mistake.

Compatible with which Galaxy Ultra?

This part is designed for the Samsung Galaxy S26 Ultra, and for this device only. The charging connector varies from one generation to another, even within the same Ultra range: checking the exact model before purchase remains the best guarantee of receiving a part that fits without adjustment.

What the replacement requires

The charging connector is located near the bottom of the device, in an area that often groups other components (flex cable, microphone). Removal requires suitable disassembly tools and careful handling of the surrounding flex cables to avoid any tearing.

As with any work on a printed circuit board, protection against electrostatic discharge is recommended, and a charging test before full reassembly confirms that the connector works correctly once plugged in.

Warranty on this part

The part is covered by a 2-year warranty. In the event of a proven defect on the component, this period allows for a free replacement, independently of the warranty that the supplier grants to the shop on its own distribution channel.