Original Charging Connector for Samsung Galaxy S25 Ultra

The Samsung Galaxy S25 Ultra charging connector is the essential component for charging: it carries the power to the battery. Like any electrical interface component, it undergoes repeated wear with each cable connection. After hundreds of cycles, the contact weakens, charging slows down or stops. You recognize the problem when the device only charges at certain cable angles, or when you have to force it for charging to begin. This is the signal that the connector needs to be replaced.

This part is an Original Manufacturer Service Pack. Samsung supplies its charging connectors in this specialized packaging for authorized repairs: no screen has been replaced, no component has been recycled. It is a new connector from Samsung production lines, packaged in the official replacement box. You receive the shop's warranty, valid for 2 years.

Exact Compatibility: Verify Your Model

This connector is designed for the Samsung Galaxy S25 Ultra only. Before ordering, verify your device model: go to Settings, About Phone, and look for the model code. You should see S938B. If you own a Galaxy S25, S25 Plus, or an earlier model like the S24 Ultra, this connector is not compatible with your device. Each Samsung variant has its own connector, and interchangeability does not exist: an incompatible connector will not lock in, or will damage the device's port.

Simple Replacement, but Delicate Intervention

Replacing the connector requires disassembling the device, removing the battery, and desoldering the old connector to solder a new one in place. This is an operation that requires a precision soldering iron, anti-static ventilation, and experience working on circuit boards. You can entrust this operation to an authorized Samsung repair technician, who has the equipment and training. If you do it yourself, protect yourself from short-circuit risks by powering off the device and letting it cool before opening the case.

Reception Check

Upon arrival, verify that the connector bears the reference GH96-18321A: this is the official Samsung identifier that proves the part's authenticity. Also observe the security seals on the packaging and the absence of scratches or residue on the contacts. A Service Pack part has clear markings and intact packaging. If the connector appears damaged or the packaging is open, refuse delivery.

Integration Into Your System

Once installed, this original Samsung part integrates without prior declaration: your Galaxy S25 Ultra recognizes the connector immediately and charging resumes at normal charging speeds. No driver to install, no activation required. Compatibility is total because it is the same component assembled in the factory during the device's manufacturing.