Samsung Galaxy S25 Plus Upper FRC Membrane (Service Pack)
Samsung Galaxy S25 Plus Upper FRC Flex Cable, original manufacturer part supplied in Service Pack. This charging and data transmission flex cable ensures communication between the battery, control buttons and motherboard. Like all Samsung Service Pack parts, it comes directly from the manufacturer's production lines and guarantees complete compatibility with your device. It is factory tested according to Samsung's strict technical specifications, which limits failures after repair. The flex cable is supplied in its official repair packaging, with all traceability markings and security seals. 2 year warranty.
Samsung Galaxy S25 Plus Upper FRC Flex Cable: Role and Recognition
The Upper FRC Flex Cable of the Samsung Galaxy S25 Plus ensures the connection between the touch screen and the motherboard. Located in the upper area of the device, it transmits touch detection data and manages display commands. A defective flex cable causes complete lack of response to touch on the upper part of the screen, localized unresponsive areas, or repeated restarts at the moment of unlocking. This part is original Samsung Service Pack, delivered in the manufacturer's repair packaging.
Why this flex cable rather than another
The Upper FRC Flex Cable is intended for the repairer replacing the complete screen of the Galaxy S25 Plus. A new display panel cannot reuse the old flex cable if it shows signs of wear, peeling, or solder joint cracks. This original manufacturer flex cable, tested in the workshop, ensures that touch signals pass without degradation and that the screen responds immediately to contact. Unlike a compatible flex cable, it bears the exact marking that Samsung uses on its assembly line and integrates without adaptation or forcing.
What you will receive and how to proceed
The package contains the Upper FRC Flex Cable alone, identified by the manufacturer reference GH59-15816A. Installation requires removing the old touch screen and disconnecting its two flex cables from the motherboard. The Upper FRC Flex Cable connects to the first connector located at the top of the logic board. The connector accepts the friction connector: push gently until you hear a slight click. Verify before closing the device that the connector has not moved; an improperly seated flex cable causes dead zones as soon as it powers on. The operation takes approximately three minutes once the screen is removed.
Compatibility with Galaxy S25 Plus only
This flex cable is designed for the Samsung Galaxy S25 Plus - model S936B. It is not compatible with the standard Galaxy S25, Galaxy S26 Plus, or Galaxy S26. Each of these devices has its own Upper FRC Flex Cable with a slightly different connector or geometry. Before ordering, check your phone's screen: you will find the model written in the bottom right corner or in the device settings under Settings > About Phone.
Quality and Service Pack Traceability
Like all Samsung Service Pack parts, this flex cable comes from the same workshops that supply Samsung authorized repair centers. It is sealed with an official security marking and accompanied by a unique identification code allowing the technician to verify its authenticity. These new parts, not refurbished, pass the same quality control as the one assembled in the factory during initial manufacturing. You benefit from a 2-year warranty against manufacturing defects.
