Samsung Galaxy S25 Plus Upper FRC Ribbon Cable (Service Pack) : original manufacturer display control ribbon cable, tested and validated according to Samsung specifications. This ribbon cable ensures signal transmission between the motherboard and the screen, guaranteeing optimal display operation. Supplied in official Service Pack packaging, it benefits from complete traceability and guaranteed compatibility with your device.

Samsung original part factory-mounted on Galaxy S25 Plus, this Upper FRC ribbon cable restores initial display performance after damage or malfunction. Its installation restores reliable communication between the graphics processor and the touchscreen. Each component bears official Samsung markings and identification codes, immediately recognizable by authorized repair centers. Warranty 2 years.

Samsung Galaxy S25 Plus Upper FRC Flex Cable: Role and Compatibility

The Upper FRC Flex Cable is the main connector that links the touchscreen to the printed circuit board of the Samsung Galaxy S25 Plus. This flex cable transmits data from the touch layer to the motherboard and ensures communication between the display and the device's system. Without it, the screen does not respond to touch, even if the panel works. It is one of the most stressed parts during screen replacement: clumsy handling or accidental disconnection during repair renders it faulty.

This flex cable is Service Pack, Samsung's official packaging for spare parts intended for professional repair. It is identical to the one mounted at the factory and bears the manufacturer reference GH59-15816A, which you will check on your old part before ordering to confirm compatibility.

Recognizing When the FRC Flex Cable Needs Replacement

Several signs indicate that the Upper FRC Flex Cable is damaged. The touchscreen no longer responds to gestures at all, even after restart. Or entire zones of touch remain dead, while the rest works normally. Sometimes only the FRC flex cable is at fault: the screen lights up and displays correctly, but it records no contact. It also happens that the flex cable is accidentally disconnected during a previous repair: it is not broken, but its connectors have been pulled away from the port.

If you replace it at the same time as the screen, you will often discover the flex cable when disconnecting it. If it is rigid, cracked, or if its copper traces are visible and damaged, it must be replaced.

What the Package Contains

Upper FRC Flex Cable Service Pack Samsung Galaxy S25 Plus
Original manufacturer part mounted at the factory, in its official repair packaging

Installation and Essential Precautions

The FRC flex cable is reconnected after installing the new screen. You must access the flex cable port located under the screen, on the Galaxy S25 Plus motherboard. Before any handling, turn off the device and disconnect the battery if possible to avoid electrostatic damage. Handle the flex cable by its rigid edges, never by its copper traces. The connectors are delicate: excessive force breaks the port tabs or bends the contacts. Slide the flex cable gently until it clicks. A properly inserted flex cable stops flush with the connector and does not slide.

Compatibility Confirmed with Galaxy S25 Plus

This Upper FRC Flex Cable is suitable only for the Samsung Galaxy S25 Plus (model S936B). Check the reference GH59-15816A on your old part before ordering. It is usually found on a small white sticker attached to the flex cable. Other Galaxy S25 models, including the standard or Ultra model, use different flex cables.

2-Year Warranty

This original manufacturer part comes with a 2-year warranty covering manufacturing defects. It has been tested and inspected before shipment according to Samsung standards.