Rear Camera Sensor Flex Cable Samsung Galaxy S22 (Service Pack)
The rear camera sensor flex cable for the Samsung Galaxy S22 (S901B) connects the main photo sensor to the motherboard and transmits the image signal as well as the focus commands. A blurry camera, a black image, or a sensor that refuses to turn on are signs of a faulty flex cable: replacing it restores the sensor's original function without affecting the rest of the camera unit. It is supplied as a Service Pack: a genuine Samsung manufacturer part, new, in its official repair packaging, with no prior refurbishment or repair on the component. Each flex cable is covered by a 2-year warranty.
Rear camera sensor flex cable: what is it for?
On the Galaxy S22, the rear camera sensor flex cable connects the main photo sensor to the motherboard. It transmits the image signal and focus commands: without it, no information flows between the sensor and the processor.
It is not the camera module itself, but the link that makes it work. A fault on this component isolates the sensor from the rest of the device, even if the optics remain intact.
Blurry photo, black screen, or device that no longer turns on
A damaged rear camera sensor flex cable shows up in several ways: a camera that displays a permanently blurry image, a black preview screen, or a sensor that refuses to respond when the app is opened. In some cases, the interrupted contact even prevents the device from starting up normally.
Replacing this flex cable restores the sensor's original function, without affecting the rest of the camera block.
Where does this part come from?
This flex cable is an original manufacturer part, supplied as a Service Pack: it comes from the packaging used by Samsung-approved repair centers, new, with no prior trade-in or repair on the component.
It carries the manufacturer reference GH41-05921A, to be checked before ordering to make sure it matches the part already fitted on the device.
A part made for the Galaxy S22 (S901B)
This flex cable is made for the Galaxy S22 (S901B). It fits in the same location as the original part, with no modification to the camera block.
What the replacement requires
Accessing this flex cable involves opening the device down to the rear camera block, an operation that requires removing the screen or the back cover depending on the method used. The connector linked to the motherboard is small: handling it with too much force can detach it without visibly breaking it, which would prevent the new part from working despite an apparently correct installation.
A suitable precision screwdriver and an antistatic mat reduce the risk of damaging the motherboard during the operation.
A part covered for two years
This rear camera sensor flex cable is covered by a 2-year warranty.
