A refurbished 200MP main camera for the Samsung Galaxy S25 Ultra

This 200MP rear main camera is extracted from an original device and refurbished according to a strict certification process. Each component receives thorough cleaning followed by advanced functional tests: sensor, optical signal, mechanical integration. The goal is to restore quality equivalent to a new part, while reducing the cost and environmental footprint of a complete repair.

Intended for the Samsung Galaxy S25 Ultra, this camera is mounted in the main position and ensures full high-resolution photography capture. Workshop tests verify the 200MP sensor operation, autofocus, optical stabilization and the integrity of the connection ribbons before shipment.

Refurbished versus new: what you gain from your repair

A refurbished part comes from an original device, which guarantees manufacturer traceability and OEM technical compliance. Optical and electronic elements are extracted according to a controlled industrial process, cleaned of any trace of wear, then subjected to a battery of functional diagnostics. This process allows recovery of reliable components without adding cosmetic defects: if the camera worked in a first device, it continues after refurbishment.

At a budget equivalent to or lower than that of a new part sold in a workshop, this approach also benefits rare or older devices for which a new replacement does not exist. The functional lifespan remains identical: the tests do not accelerate wear, they verify it before sending the camera to the customer.

Compatibility and installation on the Galaxy S25 Ultra

This camera installs exclusively on the Samsung Galaxy S25 Ultra. The connector, fixing ring and dimensions match the specific chassis of this model. Before installation, verify that the old detached module bears the same reference on the device: the model S938B appears on the ribbon or near the rear sensor.

Installation requires removing the old camera block, positioning the new camera in its housing and reconnecting the flat ribbons. Regular pressure ensures proper mechanical fit. No electronic tools are necessary; a screwdriver and antistatic protection are sufficient. The total duration is short for a professional, a few minutes once the device is open.

Quality control and warranty

Each camera receives a complete functional test before shipment: sensor at 100%, correct focus, no noise or dead pixels, integrity of connections. These checks reduce the risk of failure on the final device. The warranty announced by the store is 2 years from the date of purchase.

In case of any issue identified within this period, the part is replaced or refunded according to your purchase conditions. This coverage applies to manufacturing defects and malfunctions detected in normal use, not to damage caused by mishandling or exposure to water after installation.