Adhesive Kit Rear Glass Samsung Galaxy S24 (Service Pack)
Rear glass adhesive kit for Samsung Galaxy S24 (reference S921B), to be used when replacing or removing the rear glass. This is an original manufacturer part, supplied as a Service Pack: it comes from the same supply chain as the parts fitted in the factory, in Samsung's repair packaging, with no intermediate processing or repair. A new kit guarantees a clean installation, with no old adhesive residue to scrape off before bonding. The shop provides a 2-year warranty on this reference.
Rear Glass Adhesive Kit Samsung Galaxy S24 (Service Pack)
This adhesive kit is designed for fixing the rear glass of the Galaxy S24 (reference S921B). This is a Service Pack part: an original manufacturer adhesive, delivered in Samsung's repair packaging, and not a generic adhesive cut to fit the housing.
This reference applies exclusively to the Galaxy S24. It is not used on other models in the range, each having its own kit adapted to the dimensions of its casing.
When should this adhesive be replaced?
The original adhesive loses its bonding power after a first disassembly: a rear glass removed to access the battery or internal flex cables cannot be put back with the same film without risking detachment or moisture infiltration through the edges. This kit serves precisely to redo this sealing during a repair.
It is used both after replacing a cracked rear glass and during work on the battery or cameras, whenever the cover must be reopened.
What does a Service Pack adhesive provide?
Unlike a generic adhesive, this kit is manufactured to Samsung's exact tolerances: precise cutting around the camera openings, calibrated thickness to maintain the sealing pressure intended by the manufacturer. A poorly sized adhesive leaves visible gaps on the edges or no longer ensures dust sealing.
The manufacturer reference GH82-33293A allows you to verify, before ordering, that this is indeed the kit intended for this model.
Precautions during installation
Installation requires fully removing the old adhesive residue before applying the new film, otherwise uneven bonding may occur. Light heating facilitates the removal of residue without risking marking the glass. Alignment must be done before final bonding: once the adhesive is pressed, the glass can no longer be repositioned.
Warranty
This part is covered by a 2-year warranty.
